Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### done Bytes transferred = 3797598 (39f25e hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3797534 Bytes = 3.6 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc2-212162-g9735a22 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Apr 10 00:57:39 MDT 2016 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c0cbe040, node_mem_map cfbb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] percpu: Embedded 14 pages/cpu @cfb3c000 s25448 r8192 d23704 u57344 [ 0.000000] pcpu-alloc: s25448 r8192 d23704 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 220432K/260096K available (7386K kernel code, 785K rwdata, 2316K rodata, 1024K init, 8117K bss, 23280K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a79930 (10695 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc44dc ( 786 kB) [ 0.000000] .bss : 0xc0cc6000 - 0xc14b36b8 (8118 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000031] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000075] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000180] OMAP clocksource: timer1 at 13000000 Hz [ 0.001700] Console: colour dummy device 80x30 [ 0.001800] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001818] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001832] ... MAX_LOCK_DEPTH: 48 [ 0.001846] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001859] ... CLASSHASH_SIZE: 4096 [ 0.001872] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001885] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001899] ... CHAINHASH_SIZE: 32768 [ 0.001912] memory used by lock dependency info: 5167 kB [ 0.001926] per task-struct memory footprint: 1536 bytes [ 0.001971] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.105498] pid_max: default: 32768 minimum: 301 [ 0.106301] Security Framework initialized [ 0.106544] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106571] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.112764] CPU: Testing write buffer coherency: ok [ 0.115893] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.116116] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.123438] Brought up 1 CPUs [ 0.123477] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.123494] CPU: All CPU(s) started in SVC mode. [ 0.130894] devtmpfs: initialized [ 0.256995] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.258656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.261219] pinctrl core: initialized pinctrl subsystem [ 0.271383] NET: Registered protocol family 16 [ 0.281937] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.365964] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.368399] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.470514] cpuidle: using governor menu [ 0.471626] Reprogramming SDRC clock to 332000000 Hz [ 0.476518] In-band Error seen by USB_OTG at address 0 [ 0.476548] ------------[ cut here ]------------ [ 0.476598] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124 [ 0.476615] Modules linked in: [ 0.476650] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc2-212162-g9735a22 #1 [ 0.476666] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.476725] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.476769] [] (show_stack) from [] (dump_stack+0xa8/0xe0) [ 0.476811] [] (dump_stack) from [] (__warn+0xd8/0x104) [ 0.476841] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 0.476871] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.476907] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0xa0/0x2f0) [ 0.476936] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 0.476965] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x14c) [ 0.476992] [] (handle_level_irq) from [] (generic_handle_irq+0x18/0x28) [ 0.477017] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.477052] [] (__handle_domain_irq) from [] (__irq_svc+0x58/0x78) [ 0.477081] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.477108] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x450/0x5d0) [ 0.477134] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x170) [ 0.477161] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.477201] [] (omap3_l3_probe) from [] (platform_drv_probe+0x50/0xb0) [ 0.477230] [] (platform_drv_probe) from [] (driver_probe_device+0x1f0/0x2ac) [ 0.477258] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.477285] [] (bus_for_each_drv) from [] (__device_attach+0xa0/0x104) [ 0.477311] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.477336] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.477366] [] (device_add) from [] (of_platform_device_create_pdata+0x80/0xbc) [ 0.477390] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.477415] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.477448] [] (of_platform_populate) from [] (pdata_quirks_init+0x54/0x74) [ 0.477475] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.477502] [] (omap_generic_init) from [] (customize_machine+0x20/0x44) [ 0.477530] [] (customize_machine) from [] (do_one_initcall+0x80/0x1dc) [ 0.477571] [] (do_one_initcall) from [] (kernel_init_freeable+0x20c/0x2e8) [ 0.477599] [] (kernel_init_freeable) from [] (kernel_init+0x8/0x110) [ 0.477625] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.477805] ---[ end trace 0415734c6f371cf8 ]--- [ 0.483665] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.491080] gpio gpiochip0: (gpio): added GPIO chardev (254:0) [ 0.493755] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpiochip0 (gpio) [ 0.496554] OMAP GPIO hardware version 2.5 [ 0.498862] gpio gpiochip1: (gpio): added GPIO chardev (254:1) [ 0.502010] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpiochip1 (gpio) [ 0.506144] gpio gpiochip2: (gpio): added GPIO chardev (254:2) [ 0.507819] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpiochip2 (gpio) [ 0.511710] gpio gpiochip3: (gpio): added GPIO chardev (254:3) [ 0.513347] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpiochip3 (gpio) [ 0.517392] gpio gpiochip4: (gpio): added GPIO chardev (254:4) [ 0.519162] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpiochip4 (gpio) [ 0.523016] gpio gpiochip5: (gpio): added GPIO chardev (254:5) [ 0.524642] gpiochip_add_data: registered GPIOs 160 to 191 on device: gpiochip5 (gpio) [ 0.544316] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.545312] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.559393] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.559746] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.563436] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.730652] No ATAGs? [ 0.730705] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.732467] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.732509] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.734617] OMAP DMA hardware revision 4.0 [ 0.798218] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.801063] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.802587] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.803993] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.805296] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.806816] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.807146] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.808362] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.808654] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.809909] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.820789] SCSI subsystem initialized [ 0.822157] libata version 3.00 loaded. [ 0.823432] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.823609] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.824541] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.828391] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.828778] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.829563] pps_core: LinuxPPS API ver. 1 registered [ 0.829586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.829724] PTP clock support registered [ 0.838089] clocksource: Switched to clocksource timer1 [ 1.032462] VFS: Disk quotas dquot_6.6.0 [ 1.032818] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.091727] NET: Registered protocol family 2 [ 1.095204] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.095316] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.096458] TCP: Hash tables configured (established 2048 bind 2048) [ 1.096854] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.097185] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.098984] NET: Registered protocol family 1 [ 1.101939] RPC: Registered named UNIX socket transport module. [ 1.101980] RPC: Registered udp transport module. [ 1.101999] RPC: Registered tcp transport module. [ 1.102018] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.111130] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.121354] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.121794] audit: initializing netlink subsys (disabled) [ 1.122205] audit: type=2000 audit(1.120:1): initialized [ 1.130042] workingset: timestamp_bits=12 max_order=16 bucket_order=4 [ 1.135563] NFS: Registering the id_resolver key type [ 1.136230] Key type id_resolver registered [ 1.136263] Key type id_legacy registered [ 1.136583] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.146815] io scheduler noop registered [ 1.146876] io scheduler deadline registered [ 1.146979] io scheduler cfq registered (default) [ 1.152031] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.152906] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.154117] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.162311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.174236] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.174288] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.175294] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.178967] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.179018] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.179584] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.182408] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.182456] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.183019] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.592518] console [ttyO2] enabled [ 2.667461] brd: module loaded [ 2.712676] loop: module loaded [ 2.721400] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.730646] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.737306] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.742256] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.750439] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.756732] Creating 5 MTD partitions on "omap2-nand.0": [ 2.762364] 0x000000000000-0x000000080000 : "xloader" [ 2.779063] 0x000000080000-0x000000260000 : "uboot" [ 2.792751] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.805998] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.821233] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.349047] libphy: smsc911x-mdio: probed [ 3.353844] SMSC LAN8700 2d000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.366471] smsc911x 2d000000.ethernet eth0: MAC Address: 2a:57:b6:5a:a5:48 [ 3.417995] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.424488] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.434913] libphy: davinci_mdio.0: probed [ 3.439430] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.448066] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.463145] mousedev: PS/2 mouse device common for all mice [ 3.469215] i2c /dev entries driver [ 3.478613] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.484924] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.491993] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.502396] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.507257] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.513603] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.520557] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.530917] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.579975] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.586287] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.593268] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.602891] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.612412] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.619825] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.630603] ledtrig-cpu: registered to indicate activity on CPUs [ 3.640279] oprofile: using arm/armv7 [ 3.645408] Initializing XFRM netlink socket [ 3.650787] NET: Registered protocol family 10 [ 3.666570] sit: IPv6 over IPv4 tunneling driver [ 3.675642] NET: Registered protocol family 17 [ 3.680629] NET: Registered protocol family 15 [ 3.685977] Key type dns_resolver registered [ 3.691056] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.698708] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.704769] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.712105] omap2_set_init_voltage: unable to set vdd_core [ 3.719882] PM: no software I/O chain control; some wakeups may be lost [ 3.726834] pm: Failed to request pm_wkup irq [ 3.731621] ThumbEE CPU extension supported. [ 3.736170] Registering SWP/SWPB emulation handler [ 3.741289] SmartReflex Class3 initialized [ 3.761068] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.773735] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.785119] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.792088] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.799367] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.809534] no flags found for reset [ 3.813301] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.820741] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.827906] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.837741] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.847524] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.854911] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.864024] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.871013] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.878296] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.888399] no flags found for reset [ 3.892159] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.899595] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.906713] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.916586] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.926373] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.933719] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.949704] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.961428] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.968919] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.975224] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.982184] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.991806] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.001324] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.008405] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.028820] mmc0: new high speed SDHC card at address b368 [ 4.040721] mmcblk0: mmc0:b368 NCard 3.74 GiB (ro) [ 4.053134] mmcblk0: p1 p2 [ 4.091688] davinci_emac davinci_emac.0: using random MAC addr: b6:2a:4c:19:a3:8a [ 4.103930] hctosys: unable to open rtc device (rtc0) [ 4.109389] sr_init: No PMIC hook to init smartreflex [ 4.115952] sr_init: platform driver register failed for SR [ 4.199677] hsusb1_vbus: disabling [ 4.203297] hsusb2_vbus: disabling [ 4.206867] ads7846-reg: disabling [ 4.227256] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.262790] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 4.271065] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.294441] devtmpfs: mounted [ 4.301823] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) /bin/sh: can't access tty; job control turned off # # #