Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### done Bytes transferred = 3797518 (39f20e hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3797454 Bytes = 3.6 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc4-212696-gc3b46c7 (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Apr 18 01:02:01 MDT 2016 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c0cbe040, node_mem_map cfbb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] percpu: Embedded 14 pages/cpu @cfb3c000 s25448 r8192 d23704 u57344 [ 0.000000] pcpu-alloc: s25448 r8192 d23704 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 220432K/260096K available (7386K kernel code, 785K rwdata, 2316K rodata, 1024K init, 8117K bss, 23280K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a7992c (10695 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc44dc ( 786 kB) [ 0.000000] .bss : 0xc0cc6000 - 0xc14b3678 (8118 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000034] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000080] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000192] OMAP clocksource: timer1 at 13000000 Hz [ 0.001692] Console: colour dummy device 80x30 [ 0.001790] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001807] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001821] ... MAX_LOCK_DEPTH: 48 [ 0.001835] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001849] ... CLASSHASH_SIZE: 4096 [ 0.001862] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001876] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001889] ... CHAINHASH_SIZE: 32768 [ 0.001902] memory used by lock dependency info: 5167 kB [ 0.001916] per task-struct memory footprint: 1536 bytes [ 0.001955] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.105514] pid_max: default: 32768 minimum: 301 [ 0.106306] Security Framework initialized [ 0.106547] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106573] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.112732] CPU: Testing write buffer coherency: ok [ 0.115848] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.116062] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.123318] Brought up 1 CPUs [ 0.123358] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.123376] CPU: All CPU(s) started in SVC mode. [ 0.130759] devtmpfs: initialized [ 0.257914] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.259539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.262093] pinctrl core: initialized pinctrl subsystem [ 0.272195] NET: Registered protocol family 16 [ 0.282807] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.366102] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.368514] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.470159] cpuidle: using governor menu [ 0.471253] Reprogramming SDRC clock to 332000000 Hz [ 0.476062] In-band Error seen by USB_OTG at address 0 [ 0.476094] ------------[ cut here ]------------ [ 0.476144] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124 [ 0.476162] Modules linked in: [ 0.476196] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc4-212696-gc3b46c7 #1 [ 0.476213] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.476273] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.476316] [] (show_stack) from [] (dump_stack+0xa8/0xe0) [ 0.476359] [] (dump_stack) from [] (__warn+0xd8/0x104) [ 0.476388] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 0.476417] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.476454] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0xa0/0x2f0) [ 0.476483] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 0.476514] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x14c) [ 0.476541] [] (handle_level_irq) from [] (generic_handle_irq+0x18/0x28) [ 0.476567] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.476602] [] (__handle_domain_irq) from [] (__irq_svc+0x58/0x78) [ 0.476631] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.476658] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x450/0x5d0) [ 0.476685] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x170) [ 0.476713] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.476754] [] (omap3_l3_probe) from [] (platform_drv_probe+0x50/0xb0) [ 0.476786] [] (platform_drv_probe) from [] (driver_probe_device+0x1f0/0x2ac) [ 0.476814] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.476840] [] (bus_for_each_drv) from [] (__device_attach+0xa0/0x104) [ 0.476867] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.476894] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.476923] [] (device_add) from [] (of_platform_device_create_pdata+0x80/0xbc) [ 0.476949] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.476974] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.477008] [] (of_platform_populate) from [] (pdata_quirks_init+0x54/0x74) [ 0.477035] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.477062] [] (omap_generic_init) from [] (customize_machine+0x20/0x44) [ 0.477088] [] (customize_machine) from [] (do_one_initcall+0x80/0x1dc) [ 0.477129] [] (do_one_initcall) from [] (kernel_init_freeable+0x20c/0x2e8) [ 0.477157] [] (kernel_init_freeable) from [] (kernel_init+0x8/0x110) [ 0.477184] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.477364] ---[ end trace 7da1965ed4e68e2c ]--- [ 0.483202] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.490595] gpio gpiochip0: (gpio): added GPIO chardev (254:0) [ 0.493264] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio) [ 0.496007] OMAP GPIO hardware version 2.5 [ 0.498302] gpio gpiochip1: (gpio): added GPIO chardev (254:1) [ 0.501460] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio) [ 0.505283] gpio gpiochip2: (gpio): added GPIO chardev (254:2) [ 0.507151] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio) [ 0.510980] gpio gpiochip3: (gpio): added GPIO chardev (254:3) [ 0.512598] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio) [ 0.516588] gpio gpiochip4: (gpio): added GPIO chardev (254:4) [ 0.518320] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio) [ 0.522074] gpio gpiochip5: (gpio): added GPIO chardev (254:5) [ 0.523689] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio) [ 0.543108] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.544093] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.558043] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.558392] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.562101] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.730633] No ATAGs? [ 0.730687] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.732426] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.732466] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.734533] OMAP DMA hardware revision 4.0 [ 0.797466] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.800295] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.801811] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.803136] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.804432] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.805911] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.806243] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.807454] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.807746] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.808977] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.819791] SCSI subsystem initialized [ 0.821170] libata version 3.00 loaded. [ 0.822439] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.822610] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.823530] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.827498] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.827882] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.828670] pps_core: LinuxPPS API ver. 1 registered [ 0.828692] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.828799] PTP clock support registered [ 0.837037] clocksource: Switched to clocksource timer1 [ 1.031135] VFS: Disk quotas dquot_6.6.0 [ 1.031489] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.089780] NET: Registered protocol family 2 [ 1.093121] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.093231] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.094372] TCP: Hash tables configured (established 2048 bind 2048) [ 1.094727] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.095054] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.096595] NET: Registered protocol family 1 [ 1.099747] RPC: Registered named UNIX socket transport module. [ 1.099791] RPC: Registered udp transport module. [ 1.099810] RPC: Registered tcp transport module. [ 1.099827] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.108857] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.119024] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.119449] audit: initializing netlink subsys (disabled) [ 1.119865] audit: type=2000 audit(1.120:1): initialized [ 1.127478] workingset: timestamp_bits=12 max_order=16 bucket_order=4 [ 1.133166] NFS: Registering the id_resolver key type [ 1.133836] Key type id_resolver registered [ 1.133863] Key type id_legacy registered [ 1.134187] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.144361] io scheduler noop registered [ 1.144421] io scheduler deadline registered [ 1.144516] io scheduler cfq registered (default) [ 1.149526] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.150390] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.151606] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.159713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.171538] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.171593] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.172594] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.175695] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.175745] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.176298] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.179603] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.179649] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.180219] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.590308] console [ttyO2] enabled [ 2.664610] brd: module loaded [ 2.709450] loop: module loaded [ 2.718109] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.727350] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.734015] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.738924] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.747106] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.753395] Creating 5 MTD partitions on "omap2-nand.0": [ 2.759026] 0x000000000000-0x000000080000 : "xloader" [ 2.775468] 0x000000080000-0x000000260000 : "uboot" [ 2.789322] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.802484] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.817902] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.347883] libphy: smsc911x-mdio: probed [ 3.352669] SMSC LAN8700 2d000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.365283] smsc911x 2d000000.ethernet eth0: MAC Address: 82:ce:25:ed:6e:c4 [ 3.416941] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.423438] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.433774] libphy: davinci_mdio.0: probed [ 3.438293] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.446931] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.462000] mousedev: PS/2 mouse device common for all mice [ 3.468068] i2c /dev entries driver [ 3.477457] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.483773] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.490852] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.501264] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.506112] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.512457] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.519406] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.529771] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.578918] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.585234] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.592212] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.601842] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.611367] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.618782] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.629560] ledtrig-cpu: registered to indicate activity on CPUs [ 3.639183] oprofile: using arm/armv7 [ 3.644302] Initializing XFRM netlink socket [ 3.649689] NET: Registered protocol family 10 [ 3.665393] sit: IPv6 over IPv4 tunneling driver [ 3.674460] NET: Registered protocol family 17 [ 3.679452] NET: Registered protocol family 15 [ 3.684776] Key type dns_resolver registered [ 3.689845] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.697495] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.703557] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.710894] omap2_set_init_voltage: unable to set vdd_core [ 3.718725] PM: no software I/O chain control; some wakeups may be lost [ 3.725678] pm: Failed to request pm_wkup irq [ 3.730450] ThumbEE CPU extension supported. [ 3.734986] Registering SWP/SWPB emulation handler [ 3.740092] SmartReflex Class3 initialized [ 3.760090] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.772763] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.784164] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.791134] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.798411] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.808591] no flags found for reset [ 3.812361] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.819808] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.826973] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.836855] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.846600] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.853982] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.863075] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.870070] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.877360] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.887458] no flags found for reset [ 3.891221] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.898656] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.905783] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.915663] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.925449] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.932799] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.948726] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.960486] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.967984] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.974287] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.981247] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.990872] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.000389] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.007462] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.027812] mmc0: new high speed SDHC card at address b368 [ 4.039669] mmcblk0: mmc0:b368 NCard 3.74 GiB (ro) [ 4.052033] mmcblk0: p1 p2 [ 4.090553] davinci_emac davinci_emac.0: using random MAC addr: f2:50:9f:78:3f:d0 [ 4.102743] hctosys: unable to open rtc device (rtc0) [ 4.108208] sr_init: No PMIC hook to init smartreflex [ 4.114767] sr_init: platform driver register failed for SR [ 4.198960] hsusb1_vbus: disabling [ 4.202606] hsusb2_vbus: disabling [ 4.206184] ads7846-reg: disabling [ 4.226627] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.262034] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 4.270314] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.293692] devtmpfs: mounted [ 4.301045] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) /bin/sh: can't access tty; job control turned off # # #