U-Boot SPL 2014.07-gfb6ab76 (Jul 06 2015 - 16:10:49) Error: NAND flash not present on this board SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2014.07-gfb6ab76 (Jul 06 2015 - 16:10:49) I2C: ready DRAM: 1 GiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment Net: not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 1  0 U-Boot# U-Boot# setenv autoload 0 U-Boot# U-Boot# setenv serverip 192.168.57.1 U-Boot# U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete..... done link up on port 0, speed 1000, full duplex BOOTP broadcast 1 cpsw Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 2 DHCP client bound to address 192.168.57.180 U-Boot# tftpboot 0x82000000 zImage.omap2plus_defconfig link up on port 0, speed 1000, full duplex Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.180 Filename 'zImage.omap2plus_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ############################################################ 2.9 MiB/s done Bytes transferred = 3740384 (3912e0 hex) U-Boot# tftpboot 0x88000000 am437x-sk-evm.dtb link up on port 0, speed 1000, full duplex Using cpsw device TFTP from server 192.168.57.1; our IP address is 192.168.57.180 Filename 'am437x-sk-evm.dtb'. Load address: 0x88000000 Loading: *### 2.1 MiB/s done Bytes transferred = 42826 (a74a hex) U-Boot# setenv bootargs console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 init=/bin/sh U-Boot# U-Boot# bootz 0x82000000 - 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3912e0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff2000, end 8ffff749 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-213158-g04974df (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon May 2 17:11:48 MDT 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM437x SK EVM [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0cbe040, node_mem_map ef6f9000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM437x ES1.2 (sgx neon ) [ 0.000000] percpu: Embedded 14 pages/cpu @ef6b5000 s25448 r8192 d23704 u57344 [ 0.000000] pcpu-alloc: s25448 r8192 d23704 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyO0,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 init=/bin/sh [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1001664K/1048576K available (7386K kernel code, 785K rwdata, 2316K rodata, 1024K init, 8117K bss, 30528K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a7995c (10695 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc44dc ( 786 kB) [ 0.000000] .bss : 0xc0cc6000 - 0xc14b3678 (8118 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x4e430000 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001037] Console: colour dummy device 80x30 [ 0.001098] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001098] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001129] ... MAX_LOCK_DEPTH: 48 [ 0.001129] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001129] ... CLASSHASH_SIZE: 4096 [ 0.001129] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001129] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001159] ... CHAINHASH_SIZE: 32768 [ 0.001159] memory used by lock dependency info: 5167 kB [ 0.001159] per task-struct memory footprint: 1536 bytes [ 0.001190] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896) [ 0.119598] pid_max: default: 32768 minimum: 301 [ 0.119995] Security Framework initialized [ 0.120086] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.120117] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.123291] CPU: Testing write buffer coherency: ok [ 0.124847] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.124969] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.128601] Brought up 1 CPUs [ 0.128631] SMP: Total of 1 processors activated (1987.37 BogoMIPS). [ 0.128662] CPU: All CPU(s) started in SVC mode. [ 0.131866] devtmpfs: initialized [ 0.162506] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.163330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.165069] pinctrl core: initialized pinctrl subsystem [ 0.170196] NET: Registered protocol family 16 [ 0.174682] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.294525] cpuidle: using governor menu [ 0.298553] omap_l3_noc 44000000.ocp: L3 debug error: target 8 mod:0 (unclearable) [ 0.298736] omap_l3_noc 44000000.ocp: L3 application error: target 8 mod:0 (unclearable) [ 0.308471] gpio gpiochip0: (gpio): added GPIO chardev (254:0) [ 0.309997] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio) [ 0.311187] OMAP GPIO hardware version 0.1 [ 0.312255] gpio gpiochip1: (gpio): added GPIO chardev (254:1) [ 0.313476] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio) [ 0.315368] gpio gpiochip2: (gpio): added GPIO chardev (254:2) [ 0.316619] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio) [ 0.322296] platform 53701000.des: Cannot lookup hwmod 'des' [ 0.330017] No ATAGs? [ 0.330108] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.330108] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.330627] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.330657] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.366180] edma 49000000.edma: TI EDMA DMA engine driver [ 0.370452] SCSI subsystem initialized [ 0.371215] libata version 3.00 loaded. [ 0.372344] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/i2c0_pins, deferring probe [ 0.372436] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/i2c1_pins, deferring probe [ 0.372711] pps_core: LinuxPPS API ver. 1 registered [ 0.372711] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.372772] PTP clock support registered [ 0.376708] clocksource: Switched to clocksource 32k_counter [ 0.464813] VFS: Disk quotas dquot_6.6.0 [ 0.464965] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.490264] NET: Registered protocol family 2 [ 0.492218] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.492370] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.494171] TCP: Hash tables configured (established 8192 bind 8192) [ 0.494598] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.494873] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.495819] NET: Registered protocol family 1 [ 0.497650] RPC: Registered named UNIX socket transport module. [ 0.497680] RPC: Registered udp transport module. [ 0.497680] RPC: Registered tcp transport module. [ 0.497711] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.503082] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.503295] audit: initializing netlink subsys (disabled) [ 0.503540] audit: type=2000 audit(0.480:1): initialized [ 0.506591] workingset: timestamp_bits=12 max_order=18 bucket_order=6 [ 0.509643] NFS: Registering the id_resolver key type [ 0.509979] Key type id_resolver registered [ 0.509979] Key type id_legacy registered [ 0.510162] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.514923] bounce: pool size: 64 pages [ 0.515106] io scheduler noop registered [ 0.515136] io scheduler deadline registered [ 0.515167] io scheduler cfq registered (default) [ 0.518798] pinctrl-single 44e10800.pinmux: 199 pins at pa f9e10800 size 796 [ 0.522521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.527648] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.527679] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]' [ 0.527679] omap_uart 44e09000.serial: No clock speed specified: using default: 48000000 [ 0.528259] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 29, base_baud = 3000000) is a OMAP UART0 [ 1.394134] console [ttyO0] enabled [ 1.430908] brd: module loaded [ 1.453491] loop: module loaded [ 1.459320] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.526733] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.533203] davinci_mdio 4a101000.mdio: detected phy mask ffffffcf [ 1.544403] libphy: 4a101000.mdio: probed [ 1.548767] davinci_mdio 4a101000.mdio: phy[4]: device 4a101000.mdio:04, driver unknown [ 1.557220] davinci_mdio 4a101000.mdio: phy[5]: device 4a101000.mdio:05, driver unknown [ 1.566955] cpsw 4a100000.ethernet: Detected MACID = 34:b1:f7:3d:be:6a [ 1.576202] cpsw 4a100000.ethernet: cpsw: Detected MACID = 34:b1:f7:3d:be:6c [ 1.587554] mousedev: PS/2 mouse device common for all mice [ 1.593444] i2c /dev entries driver [ 1.598846] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.605194] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.612243] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.622680] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.627593] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.633880] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.640777] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.650390] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 1.659942] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 1.667053] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 1.675628] ledtrig-cpu: registered to indicate activity on CPUs [ 1.683410] oprofile: no performance counters [ 1.689331] oprofile: using timer interrupt. [ 1.694488] Initializing XFRM netlink socket [ 1.699432] NET: Registered protocol family 10 [ 1.707611] sit: IPv6 over IPv4 tunneling driver [ 1.714538] NET: Registered protocol family 17 [ 1.719360] NET: Registered protocol family 15 [ 1.724365] Key type dns_resolver registered [ 1.729156] omap_voltage_late_init: Voltage driver support not added [ 1.735900] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 1.744445] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 1.754028] ThumbEE CPU extension supported. [ 1.758666] Registering SWP/SWPB emulation handler [ 1.763702] SmartReflex Class3 initialized [ 1.813903] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 400 kHz [ 1.823760] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 400 kHz [ 1.830566] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd [ 1.836944] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.843933] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) [ 1.854431] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.859313] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 1.865600] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 1.872497] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 1.882141] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 1.891632] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 1.898681] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 1.950958] hctosys: unable to open rtc device (rtc0) [ 1.956268] sr_init: No PMIC hook to init smartreflex [ 1.961914] sr_init: platform driver register failed for SR [ 1.990386] Waiting for root device /dev/mmcblk0p2... [ 2.066589] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.078613] mmc0: new high speed SDHC card at address aaaa [ 2.087341] mmcblk0: mmc0:aaaa SS08G 7.40 GiB [ 2.096130] mmcblk0: p1 p2 [ 2.239257] EXT4-fs (mmcblk0p2): recovery complete [ 2.244842] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.253570] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.271789] devtmpfs: mounted [ 2.277465] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) sh-3.2# sh-3.2# sh-3.2#