Texas Instruments X-Loader 1.46-cm-t3517-1 (Nov 17 2010 - 13:11:36) Starting OS Bootloader... U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.1 Die ID #40f2000100000000015da3951601101c Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 3  0 CM-T3517 # CM-T3517 # setenv bootfile uImage-dtb.omap3-sbc-t3517 CM-T3517 # CM-T3517 # setenv loadaddr 0x82000000 CM-T3517 # CM-T3517 # dhcp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 192.168.57.130 CM-T3517 # tftpboot Using DaVinci EMAC device TFTP from server 192.168.57.1; our IP address is 192.168.57.130 Filename 'uImage-dtb.omap3-sbc-t3517'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ done Bytes transferred = 3800158 (39fc5e hex) CM-T3517 # setenv bootargs console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt CM-T3517 # CM-T3517 # bootm 0x82000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux- Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3800094 Bytes = 3.6 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-213158-g04974df (paul@knihy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon May 2 17:11:48 MDT 2016 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c0cbe040, node_mem_map cfbb1000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] percpu: Embedded 14 pages/cpu @cfb3c000 s25448 r8192 d23704 u57344 [ 0.000000] pcpu-alloc: s25448 r8192 d23704 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 220432K/260096K available (7386K kernel code, 785K rwdata, 2316K rodata, 1024K init, 8117K bss, 23280K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a7995c (10695 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cc44dc ( 786 kB) [ 0.000000] .bss : 0xc0cc6000 - 0xc14b3678 (8118 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000032] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns [ 0.000074] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.000188] OMAP clocksource: timer1 at 13000000 Hz [ 0.001738] Console: colour dummy device 80x30 [ 0.001838] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001856] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001872] ... MAX_LOCK_DEPTH: 48 [ 0.001888] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001902] ... CLASSHASH_SIZE: 4096 [ 0.001916] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001930] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001944] ... CHAINHASH_SIZE: 32768 [ 0.001958] memory used by lock dependency info: 5167 kB [ 0.001973] per task-struct memory footprint: 1536 bytes [ 0.002018] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.095572] pid_max: default: 32768 minimum: 301 [ 0.096350] Security Framework initialized [ 0.096606] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.096632] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.102863] CPU: Testing write buffer coherency: ok [ 0.105972] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.106190] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.113450] Brought up 1 CPUs [ 0.113490] SMP: Total of 1 processors activated (597.60 BogoMIPS). [ 0.113509] CPU: All CPU(s) started in SVC mode. [ 0.120923] devtmpfs: initialized [ 0.249868] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.251535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.254086] pinctrl core: initialized pinctrl subsystem [ 0.264381] NET: Registered protocol family 16 [ 0.274813] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.361155] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.363609] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.467470] cpuidle: using governor menu [ 0.468589] Reprogramming SDRC clock to 332000000 Hz [ 0.473259] In-band Error seen by USB_OTG at address 0 [ 0.473291] ------------[ cut here ]------------ [ 0.473340] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xcc/0x124 [ 0.473359] Modules linked in: [ 0.473394] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-213158-g04974df #1 [ 0.473411] Hardware name: Generic AM3517 (Flattened Device Tree) [ 0.473471] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.473514] [] (show_stack) from [] (dump_stack+0xa8/0xe0) [ 0.473558] [] (dump_stack) from [] (__warn+0xd8/0x104) [ 0.473589] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 0.473620] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0xcc/0x124) [ 0.473658] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0xa0/0x2f0) [ 0.473687] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 0.473718] [] (handle_irq_event) from [] (handle_level_irq+0xc0/0x14c) [ 0.473746] [] (handle_level_irq) from [] (generic_handle_irq+0x18/0x28) [ 0.473772] [] (generic_handle_irq) from [] (__handle_domain_irq+0x68/0xdc) [ 0.473808] [] (__handle_domain_irq) from [] (__irq_svc+0x58/0x78) [ 0.473839] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.473867] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x450/0x5d0) [ 0.473895] [] (__setup_irq) from [] (request_threaded_irq+0xc4/0x170) [ 0.473923] [] (request_threaded_irq) from [] (omap3_l3_probe+0xe0/0x164) [ 0.473965] [] (omap3_l3_probe) from [] (platform_drv_probe+0x50/0xb0) [ 0.473996] [] (platform_drv_probe) from [] (driver_probe_device+0x1f0/0x2ac) [ 0.474026] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 0.474053] [] (bus_for_each_drv) from [] (__device_attach+0xa0/0x104) [ 0.474080] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 0.474108] [] (bus_probe_device) from [] (device_add+0x33c/0x52c) [ 0.474138] [] (device_add) from [] (of_platform_device_create_pdata+0x80/0xbc) [ 0.474163] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xe0/0x184) [ 0.474188] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xac) [ 0.474223] [] (of_platform_populate) from [] (pdata_quirks_init+0x54/0x74) [ 0.474251] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.474280] [] (omap_generic_init) from [] (customize_machine+0x20/0x44) [ 0.474308] [] (customize_machine) from [] (do_one_initcall+0x80/0x1dc) [ 0.474351] [] (do_one_initcall) from [] (kernel_init_freeable+0x20c/0x2e8) [ 0.474380] [] (kernel_init_freeable) from [] (kernel_init+0x8/0x110) [ 0.474407] [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [ 0.474586] ---[ end trace 48d06479ac8bd169 ]--- [ 0.480686] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.488113] gpio gpiochip0: (gpio): added GPIO chardev (254:0) [ 0.490821] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio) [ 0.493413] OMAP GPIO hardware version 2.5 [ 0.495858] gpio gpiochip1: (gpio): added GPIO chardev (254:1) [ 0.499073] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio) [ 0.502971] gpio gpiochip2: (gpio): added GPIO chardev (254:2) [ 0.504653] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio) [ 0.508723] gpio gpiochip3: (gpio): added GPIO chardev (254:3) [ 0.510389] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio) [ 0.514206] gpio gpiochip4: (gpio): added GPIO chardev (254:4) [ 0.516132] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio) [ 0.519950] gpio gpiochip5: (gpio): added GPIO chardev (254:5) [ 0.521626] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio) [ 0.541352] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.542349] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.556407] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.556759] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.560501] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.730569] No ATAGs? [ 0.730623] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.732399] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.732443] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.734504] OMAP DMA hardware revision 4.0 [ 0.798491] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.801284] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb1_power_reg[0]' [ 0.802827] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/hsusb2_power_reg[0]' [ 0.804183] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ads7846-reg[0]' [ 0.805675] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vmmc[0]' [ 0.807066] reg-fixed-voltage wl12xx_vmmc2: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.807400] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/wl12xx_vaux2[0]' [ 0.808625] reg-fixed-voltage audio_amp: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_sb_t35_audio_amp, deferring probe [ 0.808918] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vddvario-sb-t35[0]' [ 0.810177] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-vdd33a-sb-t35[0]' [ 0.820969] SCSI subsystem initialized [ 0.822338] libata version 3.00 loaded. [ 0.823616] usb_phy_generic hsusb1_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.823787] usb_phy_generic hsusb2_phy: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.824703] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe [ 0.828542] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.828937] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe [ 0.829720] pps_core: LinuxPPS API ver. 1 registered [ 0.829744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.829854] PTP clock support registered [ 0.838317] clocksource: Switched to clocksource timer1 [ 1.035680] VFS: Disk quotas dquot_6.6.0 [ 1.036041] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.095223] NET: Registered protocol family 2 [ 1.099031] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.099142] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.100476] TCP: Hash tables configured (established 2048 bind 2048) [ 1.100834] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.101208] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.102924] NET: Registered protocol family 1 [ 1.105861] RPC: Registered named UNIX socket transport module. [ 1.105904] RPC: Registered udp transport module. [ 1.105925] RPC: Registered tcp transport module. [ 1.105944] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.114913] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.125262] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.125714] audit: initializing netlink subsys (disabled) [ 1.126130] audit: type=2000 audit(1.120:1): initialized [ 1.133896] workingset: timestamp_bits=12 max_order=16 bucket_order=4 [ 1.139808] NFS: Registering the id_resolver key type [ 1.140490] Key type id_resolver registered [ 1.140524] Key type id_legacy registered [ 1.140850] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.151122] io scheduler noop registered [ 1.151183] io scheduler deadline registered [ 1.151286] io scheduler cfq registered (default) [ 1.155972] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.156831] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.158025] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36 [ 1.166248] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.178941] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.179005] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806a000[0]' [ 1.179791] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.183095] omap_uart 4806c000.serial: no wakeirq for uart1 [ 1.183144] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@4806c000[0]' [ 1.183802] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.186191] omap_uart 49020000.serial: no wakeirq for uart2 [ 1.186239] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@49020000[0]' [ 1.186797] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.606749] console [ttyO2] enabled [ 2.683046] brd: module loaded [ 2.727922] loop: module loaded [ 2.736613] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.745882] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc [ 2.752713] nand: Samsung NAND 512MiB 3,3V 8-bit [ 2.757591] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.765827] 5 ofpart partitions found on MTD device omap2-nand.0 [ 2.772225] Creating 5 MTD partitions on "omap2-nand.0": [ 2.777841] 0x000000000000-0x000000080000 : "xloader" [ 2.794562] 0x000000080000-0x000000260000 : "uboot" [ 2.808625] 0x000000260000-0x0000002a0000 : "uboot environment" [ 2.822033] 0x0000002a0000-0x0000006a0000 : "linux" [ 2.837497] 0x0000006a0000-0x00001ff20000 : "rootfs" [ 3.369339] libphy: smsc911x-mdio: probed [ 3.374164] SMSC LAN8700 2d000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.386873] smsc911x 2d000000.ethernet eth0: MAC Address: 1a:92:40:a4:df:60 [ 3.438219] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.444761] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.455183] libphy: davinci_mdio.0: probed [ 3.459731] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.468432] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.483565] mousedev: PS/2 mouse device common for all mice [ 3.489682] i2c /dev entries driver [ 3.499132] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.505497] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.512657] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.523144] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.528033] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.534430] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.541429] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.551868] omap_hsmmc 4809c000.mmc: Got WP GPIO [ 3.600202] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.606564] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 3.613602] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.623304] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.632893] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 3.640358] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 3.651128] ledtrig-cpu: registered to indicate activity on CPUs [ 3.660801] oprofile: using arm/armv7 [ 3.665980] Initializing XFRM netlink socket [ 3.671405] NET: Registered protocol family 10 [ 3.687289] sit: IPv6 over IPv4 tunneling driver [ 3.696473] NET: Registered protocol family 17 [ 3.701504] NET: Registered protocol family 15 [ 3.706879] Key type dns_resolver registered [ 3.711992] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva [ 3.719704] omap2_set_init_voltage: unable to set vdd_mpu_iva [ 3.725809] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.733206] omap2_set_init_voltage: unable to set vdd_core [ 3.741026] PM: no software I/O chain control; some wakeups may be lost [ 3.748032] pm: Failed to request pm_wkup irq [ 3.752843] ThumbEE CPU extension supported. [ 3.757414] Registering SWP/SWPB emulation handler [ 3.762559] SmartReflex Class3 initialized [ 3.782495] of_get_named_gpiod_flags: parsed 'gpio' property of node '/wl12xx_vmmc2[0]' - status (0) [ 3.795267] of_get_named_gpiod_flags: parsed 'gpio' property of node '/audio_amp[0]' - status (0) [ 3.806788] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset [ 3.813813] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.821141] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb1_phy[0]' - status (0) [ 3.831381] no flags found for reset [ 3.835175] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect [ 3.842673] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup [ 3.849892] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' [ 3.859849] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' [ 3.869708] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup [ 3.877103] usb_phy_generic hsusb1_phy: lookup for GPIO vbus-detect failed [ 3.886269] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset [ 3.893310] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.900645] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/hsusb2_phy[0]' - status (0) [ 3.910824] no flags found for reset [ 3.914616] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect [ 3.922100] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup [ 3.929317] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb2_phy[0]' [ 3.939273] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb2_phy[0]' [ 3.949129] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup [ 3.956483] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed [ 3.972625] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 3.983935] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 3.991487] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 3.997845] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.004881] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.014578] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.024169] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.031297] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.052822] mmc0: new high speed SDHC card at address b368 [ 4.064154] mmcblk0: mmc0:b368 NCard 3.74 GiB (ro) [ 4.076550] mmcblk0: p1 p2 [ 4.111921] davinci_emac davinci_emac.0: using random MAC addr: 7a:e7:ce:f2:a4:d4 [ 4.124254] hctosys: unable to open rtc device (rtc0) [ 4.129757] sr_init: No PMIC hook to init smartreflex [ 4.136368] sr_init: platform driver register failed for SR [ 4.221246] hsusb1_vbus: disabling [ 4.224906] hsusb2_vbus: disabling [ 4.228648] ads7846-reg: disabling [ 4.249569] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.284782] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 4.293231] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.317320] devtmpfs: mounted [ 4.324706] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) /bin/sh: can't access tty; job control turned off # # #